Spotify Pre-Save: How to Make a Pre-Save Link (Even for Singles)

How to make a Spotify pre-save link: who qualifies for Countdown Pages, the landing page route for singles, what fans see, why a pre-save fails and how to swap the link on release day.

By The VISU TeamNovember 16, 20267 min read
Spotify Pre-Save: How to Make a Pre-Save Link (Even for Singles)

A Spotify pre-save lets fans line up your next release before it comes out. They tap once and, on release day, the music lands in their library without them having to remember your name, search for the title or find the right version. For independent artists, that first day matters: it's when your most loyal listeners show up together.

The catch is that Spotify's own pre-save tool only works for some artists and some releases, and that's the part most quick answers skip. This guide covers who can use Spotify's built-in pre-save, how to make a pre-save link when you can't (singles, smaller artists), what fans see when they tap it, why a pre-save fails, and how to swap the link on release day so nobody lands on a dead page. Steps follow Spotify for Artists support as of October 2026.

A pre-save is a promise from the fan: "save this to my library when it's out." The platforms handle it in slightly different ways:

  • Spotify calls it a pre-save. When the release goes live, it's added to the fan's library.
  • Apple Music calls it a pre-add. The fan adds the upcoming album or EP to their library, and it becomes playable on release day.

A pre-save link is just the address you share to collect those promises. It can point to a page inside Spotify itself, or to a landing page that shows one button per platform. Which one you use depends on your release, your distributor and your audience size.

A QR code at the merch table keeps working after release day if it points to a page you can update.
A QR code at the merch table keeps working after release day if it points to a page you can update.

Can you use Spotify's own pre-save? Check this first

Spotify's built-in pre-save lives in Spotify for Artists and is called Countdown Pages. Before you plan around it, check the eligibility rules in Spotify's support article, because they're strict:

  • Artist: at least 3,000 monthly active listeners. Spotify points out that this is the "monthly active listeners" figure under Audience, then Segments, not your overall monthly listeners.
  • Release: only new, original albums and EPs. Singles aren't eligible, and neither are deluxe, anniversary, reissue or remaster editions and compilations.
  • Delivery: your label or distributor has to deliver the finished release through the standard delivery process (DDEX). Spotify says the option to create the page shows up within 72 hours of the release metadata arriving.
  • Several main artists: only the first-named main artist can create the page, and it appears only on that artist's profile.

If you're releasing a single, or you're under the listener threshold, skip ahead to the landing page option. That's the route most independent artists actually use.

How to make a Spotify pre-save with Countdown Pages

If you qualify, the steps from Spotify's help page are:

  1. Log in to Spotify for Artists on the web.
  2. Go to Music, then Upcoming.
  3. Select the release and click Get started.
  4. Add countdown videos and tag merch if you have them.
  5. Review and publish.

You can edit the page any time before release. According to Spotify, a Countdown Page lets fans pre-save, preview your tracklist, watch countdown videos and shop merch, and it shows up on your artist profile, in Search, on Home and in the Upcoming Releases hub. Spotify also suggests setting it as your Artist Pick and sharing it on your socials once it's live.

On release day, Spotify sends a push notification to everyone who pre-saved and adds the release to their library. To see your pre-save count, go to Upcoming, then View Analytics in Spotify for Artists.

For singles, or if you don't meet the Countdown Page threshold yet, the common route is a pre-save landing page. Many music distributors include one with a release, and there are also dedicated smart link services for musicians. They all work the same way:

  1. You enter the release details (often an identifier from your distributor) and the release date.
  2. The service builds a page with your artwork and one button per platform.
  3. A fan taps the Spotify or Apple Music button and connects their account, granting the service permission to save the release on their behalf.
  4. On release day, the service adds the release to the fan's library, and the same page usually turns into a "listen now" page.

Two things to check before you choose one: whether it supports the platforms your fans actually use, and what data you get back, such as the number of pre-saves or fan emails if they opt in. Read the permissions screen yourself too. Fans can see what they're agreeing to, and an aggressive permission list can cost you taps.

Apple Music pre-add

Apple Music pre-adds are set up through your distributor, not inside an app you control. In general, the release needs to be set up for pre-order on Apple Music, and many distributors only offer pre-add for albums and EPs, not single-track releases. Requirements and timing vary by distributor, so check your distributor's help pages before you promise Apple Music fans a pre-add button.

What fans see when they pre-save

It helps to know the fan side, because it's what you're asking people to do:

  • With a Countdown Page, the fan opens it inside Spotify, from your profile, from Search or from a link you shared, and taps Pre-save. No extra login, since they're already in the app.
  • With a landing page, the fan taps the Spotify button, logs in to Spotify in the browser if they aren't already, and approves the permissions the service asks for. That extra step is where most people drop off, so say clearly in your posts what will happen: "Tap Spotify, log in once, and it's in your library on Friday."

Why a Spotify pre-save isn't working

  • You don't see the Countdown Page option. The release may be a single, a reissue or a compilation, the artist may be under 3,000 monthly active listeners, or the metadata may not have arrived yet. Wait the 72 hours Spotify mentions, then ask your distributor whether the release was delivered.
  • The release date changed. Update the date with your distributor and on the landing page, or fans may get the wrong countdown.
  • Fans say it asked for too much access. Some pre-save services ask for broad permissions. If your audience hesitates, try a service with a lighter permission screen.
  • The music didn't show up in a fan's library. Ask them to check that they used the same Spotify account they listen with, and share the "listen now" link as a backup on release day.
  • Your link still says pre-save after release. See the release-day swap below.

A pre-save link only works if people see it more than once. Plan a short campaign instead of a single post:

  • Your link in bio. Put the pre-save at the very top of your link-in-bio page for the whole campaign. It's where fans go after a teaser, so it should be the first thing they see. Our guide to organizing your links by priority explains why the top slot gets the most taps.
  • Teasers. Every snippet, studio clip or behind-the-scenes video should end with the same line: "pre-save at the link in my bio."
  • Stories with a link sticker. Repeat the link through the campaign, not just on day one.
  • Your newsletter and fan groups. These are your warmest fans, and they're the most likely to pre-save.
  • Shows. If you're playing before the release, put a QR code on a sign at the merch table or on a slide between songs. Our guide to QR codes for live events and meetups covers placement, size and what to say from the stage.

If you also want people to discover your existing music while they wait, a shared playlist can help. Here's how to share a Spotify playlist in a way that works on every app.

The release-day swap

The most common mistake with pre-save links is leaving them up after the release. A fan who taps "pre-save" on release day either gets a confusing page or a button that no longer does anything. Plan the swap in advance:

  1. The night before: prepare the "listen now" links for each platform. Most distributors show them once the release is live.
  2. Release morning: replace the pre-save at the top of your link in bio with the "listen now" link, or with a landing page that shows every platform.
  3. Same day: update the link in your pinned post, your stories and your newsletter.
  4. A week later: move the new release down a slot and put the next priority on top, such as tour dates, merch or a music video.

If you printed a QR code for the pre-save, don't point it to the pre-save page directly. Point it to a page you can update, so the same code leads to the pre-save before release and to the music after.

How VISU helps with the swap

This is the part a link-in-bio page handles well. With a VISU page at visu.to/yourname, the pre-save link sits at the top during the campaign. On release day you add the "listen now" link, switch the pre-save off and move the new link to the top, and every bio, story and QR code that points to your page is updated at once.

Every VISU account also gets a QR code linked to the profile, which is handy for the merch table and posters because it points to your page rather than to one specific release. The free plan holds 5 links plus 5 social icons, which is enough for a release campaign: pre-save, latest single, video, tour dates and merch. Starter raises that to 10 links, Pro to 20 and Premium has no limit. Musicians can see how other artists set up their pages on our music category.

Quick checklist

  • Check eligibility: Countdown Pages need an album or EP and 3,000 monthly active listeners. Singles need a landing page.
  • Build the page a few weeks before release so the campaign has time to run.
  • Tell fans what the tap does, especially if they need to log in.
  • Put the pre-save at the top of your link in bio and repeat it in every teaser.
  • Use a QR code at shows that points to a page you can update.
  • On release day, swap the pre-save for a "listen now" link everywhere.

A pre-save campaign is a few weeks of repeating one link. Create your free VISU page so that link stays in one place, from the first teaser to release day.

Frequently asked questions

How do I make a Spotify pre-save link?

If you have an album or EP and at least 3,000 monthly active listeners, create a Countdown Page in Spotify for Artists under Music, then Upcoming. For singles or smaller artists, use a pre-save landing page from your distributor or a smart link service.

Can you pre-save a single on Spotify?

Not with Spotify's own Countdown Pages, which only accept new, original albums and EPs. Singles can still get a pre-save link through a landing page from a distributor or smart link service, where fans connect their Spotify account.

What happens when you pre-save a song on Spotify?

On release day the release is added to the fan's library. With Countdown Pages, Spotify also sends a push notification to everyone who pre-saved.

Why can't I find the Countdown Page option in Spotify for Artists?

The release may be a single, reissue or compilation, the artist may be under 3,000 monthly active listeners, or the metadata may not have arrived. Spotify says the option appears within 72 hours of delivery, so check with your distributor after that.

Where can I see how many people pre-saved?

For Countdown Pages, in Spotify for Artists under Upcoming, then View Analytics. For landing pages, in the dashboard of the distributor or smart link service you used.